Update the SplashBase Firmware

Discuss the SplashBase & get support

Update the SplashBase Firmware

Postby Carl-SolderSplash » Tue Mar 19, 2013 12:26 am

There are 2 options.

Option 1 :
Update the firmware from a PC over the network using LM Flash Programmer, a tool from TI.

    1. Download and Install LM Flash, Open LM Flash
    2. Change Interface to "Ethernet"
    3. MAC address to 02-01-01-01-01-01
    4. Select the correct ethernet adapater to match the network your splashbase is on
    5. Type in a client IP that is in the same network as your selected adapter in to the "client ip" box

    Image

    6. Switch to the program tab
    7. Select the new firmware.bin file

    Image

    8. Click program, the application will now wait for the SplashBase in boot loader mode.
    9. To get a SplashBase in to boot loader mode, plug it in to your network, hold the boot button and tap the reset while holding the boot button.
    10. Once found it will flash and reboot it

Option 2 :
Use an ARM JTag to reflash the processor using code composer studio.
Instructions coming soon - Hint download CCS5 from TI
User avatar
Carl-SolderSplash
Site Admin
 
Posts: 223
Joined: Sun Mar 17, 2013 11:15 pm

Return to SplashBase LM3S6x

Who is online

Users browsing this forum: No registered users and 3 guests

cron