External Power Problem

A 40 Pin Dip packaged development board enabling you to create internet connected products

External Power Problem

Postby wpfundstein » Tue Nov 04, 2014 12:58 pm

Hi,

1. if i use a powersupply with micro usb on the wifi-dipcortex it does not work. it powered up only if i connect the USB cable to my pc.

2. if i use external power on pin 32 (+5V) und pin 31 (GND) the module also does not powered on. if i connect external power on this pins i have 3.3 V on pin p11. so i think the regulator works.

any ideas?
wpfundstein
 
Posts: 7
Joined: Fri Oct 03, 2014 12:08 am

Re: External Power Problem

Postby Carl-SolderSplash » Tue Nov 04, 2014 1:42 pm

Hi,

If you can measure 3.3v on the 3.3v pin when you apply 5v the regulator is working and so should the processor.

I would eliminate the software, use a simply blinky application to just flash the led to show the micro is running.

The USB vbus is the 5v net so there should be no electrical difference
User avatar
Carl-SolderSplash
Site Admin
 
Posts: 223
Joined: Sun Mar 17, 2013 11:15 pm

Re: External Power Problem

Postby wpfundstein » Tue Nov 04, 2014 3:10 pm

Grazy. After removing the lib USBDevice it works.
wpfundstein
 
Posts: 7
Joined: Fri Oct 03, 2014 12:08 am


Return to WiFi DipCortex

Who is online

Users browsing this forum: Google [Bot] and 3 guests

cron